Eastern Europe - Acrylic Polymers, in Primary Forms (excluding Polymethyl Methacrylate) - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingEastern Europe: Market for Acrylic Polymers, In Primary Forms (excluding Polymethyl Methacrylate) 2024
Market Size for Acrylic Polymers, In Primary Forms (excluding Polymethyl Methacrylate) in Eastern Europe
In 2023, after two years of growth, there was decline in the East European market for acrylic polymers, in primary forms (excluding polymethyl methacrylate), when its value decreased by X% to $X. The market value increased at an average annual rate of X% over the period from 2012 to 2023; however, the trend pattern indicated some noticeable fluctuations being recorded in certain years. Over the period under review, the market reached the maximum level at $X in 2022, and then shrank modestly in the following year.
Production of Acrylic Polymers, In Primary Forms (excluding Polymethyl Methacrylate) in Eastern Europe
In value terms, production of acrylic polymers, in primary forms (excluding polymethyl methacrylate) soared to $X in 2023 estimated in export price. The total production indicated a noticeable expansion from 2012 to 2023: its value increased at an average annual rate of X% over the last eleven years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, production decreased by X% against 2021 indices. The most prominent rate of growth was recorded in 2021 when the production volume increased by X% against the previous year. As a result, production reached the peak level of $X. From 2022 to 2023, production of growth remained at a somewhat lower figure.
Exports of Acrylic Polymers, In Primary Forms (excluding Polymethyl Methacrylate)
Exports in Eastern Europe
In 2023, approx. X tons of acrylic polymers, in primary forms (excluding polymethyl methacrylate) were exported in Eastern Europe; surging by X% compared with the previous year's figure. Over the period under review, exports continue to indicate a prominent increase. The pace of growth appeared the most rapid in 2018 with an increase of X%. Over the period under review, the exports of attained the maximum at X tons in 2021; however, from 2022 to 2023, the exports remained at a lower figure.
In value terms, exports of acrylic polymers, in primary forms (excluding polymethyl methacrylate) expanded remarkably to $X in 2023. In general, exports enjoyed a buoyant increase. The growth pace was the most rapid in 2018 when exports increased by X%. Over the period under review, the exports of attained the peak figure at $X in 2021; however, from 2022 to 2023, the exports failed to regain momentum.
Exports by Country
In 2023, Poland (X tons), distantly followed by the Czech Republic (X tons) and Russia (X tons) represented the key exporters of acrylic polymers, in primary forms (excluding polymethyl methacrylate), together comprising X% of total exports. The following exporters - Hungary (X tons) and Belarus (X tons) - each resulted at a X% share of total exports.
From 2012 to 2023, the biggest increases were recorded for Russia (with a CAGR of X%), while shipments for the other leaders experienced more modest paces of growth.
In value terms, Poland ($X) remains the largest acrylic polymers, in primary forms (excluding polymethyl methacrylate) supplier in Eastern Europe, comprising X% of total exports. The second position in the ranking was taken by the Czech Republic ($X), with a X% share of total exports. It was followed by Russia, with a X% share.
In Poland, exports of acrylic polymers, in primary forms (excluding polymethyl methacrylate) expanded at an average annual rate of X% over the period from 2012-2023. The remaining exporting countries recorded the following average annual rates of exports growth: the Czech Republic (X% per year) and Russia (X% per year).
Export Prices by Country
In 2023, the export price in Eastern Europe amounted to $X per ton, therefore, remained relatively stable against the previous year. Over the period under review, the export price, however, continues to indicate a relatively flat trend pattern. The most prominent rate of growth was recorded in 2021 an increase of X%. Over the period under review, the export prices reached the peak figure at $X per ton in 2022, and then declined in the following year.
There were significant differences in the average prices amongst the major exporting countries. In 2023, amid the top suppliers, the country with the highest price was Hungary ($X per ton), while the Czech Republic ($X per ton) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Hungary (X%), while the other leaders experienced more modest paces of growth.
Imports of Acrylic Polymers, In Primary Forms (excluding Polymethyl Methacrylate)
Imports in Eastern Europe
In 2023, overseas purchases of acrylic polymers, in primary forms (excluding polymethyl methacrylate) decreased by X% to X tons, falling for the second consecutive year after eight years of growth. The total import volume increased at an average annual rate of X% from 2012 to 2023; however, the trend pattern indicated some noticeable fluctuations being recorded in certain years. The most prominent rate of growth was recorded in 2016 with an increase of X%. The volume of import peaked at X tons in 2021; however, from 2022 to 2023, imports stood at a somewhat lower figure.
In value terms, imports of acrylic polymers, in primary forms (excluding polymethyl methacrylate) fell slightly to $X in 2023. Total imports indicated a tangible increase from 2012 to 2023: its value increased at an average annual rate of X% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, imports increased by X% against 2020 indices. The pace of growth appeared the most rapid in 2021 with an increase of X%. The level of import peaked at $X in 2022, and then dropped slightly in the following year.
Imports by Country
Poland was the major importer of acrylic polymers, in primary forms (excluding polymethyl methacrylate) in Eastern Europe, with the volume of imports resulting at X tons, which was approx. X% of total imports in 2023. It was distantly followed by Russia (X tons), the Czech Republic (X tons), Romania (X tons) and Hungary (X tons), together making up a X% share of total imports. Ukraine (X tons) and Belarus (X tons) took a little share of total imports.
From 2012 to 2023, the most notable rate of growth in terms of purchases, amongst the leading importing countries, was attained by the Czech Republic (with a CAGR of X%), while imports for the other leaders experienced more modest paces of growth.
In value terms, Poland ($X) constitutes the largest market for imported acrylic polymers, in primary forms (excluding polymethyl methacrylate) in Eastern Europe, comprising X% of total imports. The second position in the ranking was held by Russia ($X), with a X% share of total imports. It was followed by the Czech Republic, with an X% share.
From 2012 to 2023, the average annual growth rate of value in Poland totaled X%. In the other countries, the average annual rates were as follows: Russia (X% per year) and the Czech Republic (X% per year).
Import Prices by Country
In 2023, the import price in Eastern Europe amounted to $X per ton, stabilizing at the previous year. Overall, the import price saw a relatively flat trend pattern. The growth pace was the most rapid in 2021 an increase of X%. The level of import peaked at $X per ton in 2014; however, from 2015 to 2023, import prices failed to regain momentum.
There were significant differences in the average prices amongst the major importing countries. In 2023, amid the top importers, the country with the highest price was Hungary ($X per ton), while Russia ($X per ton) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Romania (X%), while the other leaders experienced more modest paces of growth.
Source: IndexBox Platform
This report provides an in-depth analysis of the market for acrylic polymers, in primary forms (excluding polymethyl methacrylate) in Eastern Europe. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 20165390 - Acrylic polymers, in primary forms (excluding polymethyl methacrylate)
Country coverage:
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in Eastern Europe, split by region and country
- Trade (exports and imports) in Eastern Europe
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Belarus
- Bulgaria
- Czech Republic
- Estonia
- Hungary
- Latvia
- Lithuania
- Moldova
- Poland
- Romania
- Russia
- Slovakia
- Ukraine
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for acrylic polymers, in primary forms (excluding polymethyl methacrylate) in China.
This report provides an in-depth analysis of the market for acrylic polymers, in primary forms (excluding polymethyl methacrylate) in the EU.
This report provides an in-depth analysis of the global market for acrylic polymers, in primary forms (excluding polymethyl methacrylate).
This report provides an in-depth analysis of the market for acrylic polymers, in primary forms (excluding polymethyl methacrylate) in Asia.
This report provides an in-depth analysis of the market for acrylic polymers, in primary forms (excluding polymethyl methacrylate) in the U.S..