Netherlands - U-Sections of Non-Alloy Steel - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingNetherlands: Non-Alloy Steel U-Section Market 2024
Non-Alloy Steel U-Section Market Size in the Netherlands
In 2023, the Dutch non-alloy steel u-section market decreased by X% to $X for the first time since 2020, thus ending a two-year rising trend. Overall, the total consumption indicated notable growth from 2012 to 2023: its value increased at an average annual rate of X% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Over the period under review, the market reached the maximum level at $X in 2022, and then reduced notably in the following year.
Non-Alloy Steel U-Section Production in the Netherlands
In value terms, non-alloy steel u-section production fell to $X in 2023 estimated in export price. In general, production, however, continues to indicate strong growth. The pace of growth was the most pronounced in 2014 when the production volume increased by X% against the previous year. Non-alloy steel u-section production peaked at $X in 2015; however, from 2016 to 2023, production remained at a lower figure.
Non-Alloy Steel U-Section Exports
Exports from the Netherlands
In 2023, shipments abroad of u-sections of non-alloy steel decreased by X% to X tons for the first time since 2019, thus ending a three-year rising trend. Over the period under review, exports saw a perceptible slump. The pace of growth appeared the most rapid in 2015 when exports increased by X%. As a result, the exports attained the peak of X tons. From 2016 to 2023, the growth of the exports remained at a somewhat lower figure.
In value terms, non-alloy steel u-section exports plummeted to $X in 2023. Overall, exports continue to indicate a perceptible shrinkage. The pace of growth appeared the most rapid in 2015 with an increase of X% against the previous year. As a result, the exports reached the peak of $X. From 2016 to 2023, the growth of the exports remained at a somewhat lower figure.
Exports by Country
Belgium (X tons) was the main destination for non-alloy steel u-section exports from the Netherlands, with a X% share of total exports. Moreover, non-alloy steel u-section exports to Belgium exceeded the volume sent to the second major destination, the UK (X tons), more than tenfold. Germany (X tons) ranked third in terms of total exports with a X% share.
From 2012 to 2023, the average annual growth rate of volume to Belgium was relatively modest. Exports to the other major destinations recorded the following average annual rates of exports growth: the UK (X% per year) and Germany (X% per year).
In value terms, Belgium ($X) remains the key foreign market for u-sections of non-alloy steel exports from the Netherlands, comprising X% of total exports. The second position in the ranking was held by the UK ($X), with a X% share of total exports. It was followed by Germany, with a X% share.
From 2012 to 2023, the average annual rate of growth in terms of value to Belgium was relatively modest. Exports to the other major destinations recorded the following average annual rates of exports growth: the UK (X% per year) and Germany (X% per year).
Export Prices by Country
In 2023, the average non-alloy steel u-section export price amounted to $X per ton, waning by X% against the previous year. Overall, the export price showed a relatively flat trend pattern. The most prominent rate of growth was recorded in 2018 when the average export price increased by X% against the previous year. The export price peaked at $X per ton in 2022, and then contracted remarkably in the following year.
Prices varied noticeably by country of destination: amid the top suppliers, the country with the highest price was the United States ($X per ton), while the average price for exports to Belgium ($X per ton) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was recorded for supplies to South Africa (X%), while the prices for the other major destinations experienced more modest paces of growth.
Non-Alloy Steel U-Section Imports
Imports into the Netherlands
In 2023, after two years of growth, there was significant decline in overseas purchases of u-sections of non-alloy steel, when their volume decreased by X% to X tons. In general, imports, however, showed a relatively flat trend pattern. The most prominent rate of growth was recorded in 2021 with an increase of X% against the previous year. Over the period under review, imports hit record highs at X tons in 2022, and then dropped remarkably in the following year.
In value terms, non-alloy steel u-section imports contracted markedly to $X in 2023. Over the period under review, imports, however, recorded a pronounced increase. The pace of growth was the most pronounced in 2021 when imports increased by X%. Over the period under review, imports attained the maximum at $X in 2022, and then fell markedly in the following year.
Imports by Country
Germany (X tons), Luxembourg (X tons) and Spain (X tons) were the main suppliers of non-alloy steel u-section imports to the Netherlands, together accounting for X% of total imports. Poland, France, Belgium and the UK lagged somewhat behind, together comprising a further X%.
From 2012 to 2023, the most notable rate of growth in terms of purchases, amongst the main suppliers, was attained by Belgium (with a CAGR of X%), while imports for the other leaders experienced more modest paces of growth.
In value terms, Germany ($X) constituted the largest supplier of u-sections of non-alloy steel to the Netherlands, comprising X% of total imports. The second position in the ranking was held by Luxembourg ($X), with a X% share of total imports. It was followed by Spain, with a X% share.
From 2012 to 2023, the average annual growth rate of value from Germany totaled X%. The remaining supplying countries recorded the following average annual rates of imports growth: Luxembourg (X% per year) and Spain (X% per year).
Import Prices by Country
The average non-alloy steel u-section import price stood at $X per ton in 2023, with a decrease of X% against the previous year. Over the period under review, the import price continues to indicate a perceptible decrease. The most prominent rate of growth was recorded in 2021 when the average import price increased by X% against the previous year. Over the period under review, average import prices reached the peak figure at $X per ton in 2022, and then dropped dramatically in the following year.
There were significant differences in the average prices amongst the major supplying countries. In 2023, amid the top importers, the country with the highest price was the UK ($X per ton), while the price for Poland ($X per ton) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by the UK (X%), while the prices for the other major suppliers experienced more modest paces of growth.
Source: IndexBox Platform
This report provides an in-depth analysis of the non-alloy steel u-section market in the Netherlands. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 24107110 - U-sections of a web height of .80 mm or more (of non-alloy steel)
Country coverage:
- Netherlands
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in the Netherlands
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption In 2012-2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
- Trade Balance, In Physical Terms, 2012-2023
- Trade Balance, In Value Terms, 2012-2023
- Per Capita Consumption, 2012-2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
Recommended reports
This report provides an in-depth analysis of the non-alloy steel u-section market in Asia.
This report provides an in-depth analysis of the non-alloy steel u-section market in the U.S..
This report provides an in-depth analysis of the non-alloy steel u-section market in China.
This report provides an in-depth analysis of the non-alloy steel u-section market in the EU.
This report provides an in-depth analysis of the global non-alloy steel u-section market.