Norway - Machine-Tools for Working Wood - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingNorway: Market for Machine-Tools For Working Wood 2024
Market Size for Machine-Tools For Working Wood in Norway
After six years of growth, the Norwegian machine-tool for working wood market decreased by X% to $X in 2023. Overall, consumption continues to indicate a slight reduction. Machine-tool for working wood consumption peaked at $X in 2022, and then declined rapidly in the following year.
Exports of Machine-Tools For Working Wood
Exports from Norway
Machine-tool for working wood exports from Norway contracted dramatically to X units in 2023, reducing by X% against 2022 figures. In general, exports recorded a deep downturn. The most prominent rate of growth was recorded in 2017 when exports increased by X% against the previous year. As a result, the exports reached the peak of X units. From 2018 to 2023, the growth of the exports remained at a lower figure.
In value terms, machine-tool for working wood exports skyrocketed to $X in 2023. Overall, exports recorded a relatively flat trend pattern. Over the period under review, the exports reached the maximum at $X in 2013; however, from 2014 to 2023, the exports stood at a somewhat lower figure.
Exports by Country
Sweden (X units) was the main destination for machine-tool for working wood exports from Norway, with a X% share of total exports. Moreover, machine-tool for working wood exports to Sweden exceeded the volume sent to the second major destination, Finland (X units), twofold. The third position in this ranking was taken by Singapore (X units), with a X% share.
From 2012 to 2023, the average annual rate of growth in terms of volume to Sweden totaled X%. Exports to the other major destinations recorded the following average annual rates of exports growth: Finland (X% per year) and Singapore (X% per year).
In value terms, the largest markets for machine-tool for working wood exported from Norway were Sweden ($X), Singapore ($X) and Poland ($X), together comprising X% of total exports. Brazil, Angola, Romania, Finland, the Netherlands and Denmark lagged somewhat behind, together comprising a further X%.
Among the main countries of destination, Brazil, with a CAGR of X%, recorded the highest rates of growth with regard to the value of exports, over the period under review, while shipments for the other leaders experienced more modest paces of growth.
Export Prices by Country
The average machine-tool for working wood export price stood at $X per unit in 2023, rising by X% against the previous year. Overall, the export price showed a temperate expansion. As a result, the export price reached the peak level and is likely to continue growth in the immediate term.
Prices varied noticeably by country of destination: amid the top suppliers, the country with the highest price was Brazil ($X per unit), while the average price for exports to Finland ($X per unit) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was recorded for supplies to Brazil (X%), while the prices for the other major destinations experienced more modest paces of growth.
Imports of Machine-Tools For Working Wood
Imports into Norway
In 2023, supplies from abroad of machine-tools for working wood decreased by X% to X units, falling for the second year in a row after two years of growth. In general, imports showed a perceptible decrease. The most prominent rate of growth was recorded in 2020 with an increase of X% against the previous year. Over the period under review, imports hit record highs at X units in 2021; however, from 2022 to 2023, imports remained at a lower figure.
In value terms, machine-tool for working wood imports declined modestly to $X in 2023. Overall, imports recorded a relatively flat trend pattern. The pace of growth appeared the most rapid in 2017 with an increase of X%. Imports peaked at $X in 2012; however, from 2013 to 2023, imports stood at a somewhat lower figure.
Imports by Country
In 2023, China (X units) constituted the largest machine-tool for working wood supplier to Norway, accounting for a X% share of total imports. Moreover, machine-tool for working wood imports from China exceeded the figures recorded by the second-largest supplier, Germany (X units), ninefold. Italy (X units) ranked third in terms of total imports with an X% share.
From 2012 to 2023, the average annual growth rate of volume from China was relatively modest. The remaining supplying countries recorded the following average annual rates of imports growth: Germany (X% per year) and Italy (X% per year).
In value terms, China ($X), Germany ($X) and Italy ($X) appeared to be the largest machine-tool for working wood suppliers to Norway, together accounting for X% of total imports.
China, with a CAGR of X%, recorded the highest growth rate of the value of imports, in terms of the main suppliers over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
The average machine-tool for working wood import price stood at $X per unit in 2023, growing by X% against the previous year. In general, import price indicated a modest expansion from 2012 to 2023: its price increased at an average annual rate of X% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, machine-tool for working wood import price increased by X% against 2020 indices. As a result, import price attained the peak level and is likely to continue growth in the immediate term.
Prices varied noticeably by country of origin: amid the top importers, the country with the highest price was Germany ($X per unit), while the price for China ($X per unit) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by China (X%), while the prices for the other major suppliers experienced more modest paces of growth.
Source: IndexBox Platform
This report provides an in-depth analysis of the market for machine-tool for working wood in Norway. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 28491210 - Multi-purpose machines where the workpiece is manually transferred between operations, for working wood, cork, b one, hard rubber, hard plastics or similar hard materials
- Prodcom 28491220 - Multi-purpose machines where the workpiece is automatically transferred between operations for working wood, cork, bone, h ard rubber, hard plastics or similar hard materials
- Prodcom 28491233 - Band saws for working wood, cork, bone and hard rubber, h ard plastics or similar hard materials
- Prodcom 28491235 - Circular saws for working wood, cork, bone, hard rubber, hard plastics or similar hard materials
- Prodcom 28491237 - Sawing machines for working wood, cork, bone, hard rubber, h ard plastics or similar hard materials (excluding band saws, c ircular saws)
- Prodcom 28491250 - Planing, milling or moulding (by cutting) machines for working wood, cork, bone, hard rubber, hard plastics or similar hard materials
- Prodcom 28491263 - Grinding, sanding or polishing machines for working wood, c ork, bone, hard rubber, hard plastics or similar hard materials
- Prodcom 28491265 - Bending or assembling machines for working wood, cork, b one, hard rubber, hard plastics or similar hard materials
- Prodcom 28491267 - Drilling or morticing machines for working wood, cork, bone, h ard rubber, hard plastics or similar hard materials
- Prodcom 28491275 - Splitting, slicing or paring machines for working wood, cork, b one, hard rubber, hard plastics or similar hard materials
- Prodcom 28491279 - Machine tools for working wood, cork, bone, hard rubber, h ard plastics or similar hard materials, n.e.c.
- Prodcom 28491287 - Presses for the manufacture of particle board or fibre building board of wood or other ligneous materials, and other machines with individual functions for treating wood or cork
Country coverage:
- Norway
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in Norway
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption In 2012-2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
- Trade Balance, In Physical Terms, 2012-2023
- Trade Balance, In Value Terms, 2012-2023
- Per Capita Consumption, 2012-2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for machine-tool for working wood in Asia.
This report provides an in-depth analysis of the market for machine-tool for working wood in the U.S..
This report provides an in-depth analysis of the market for machine-tool for working wood in China.
This report provides an in-depth analysis of the market for machine-tool for working wood in the EU.
This report provides an in-depth analysis of the global market for machine-tool for working wood.
- Price for Machine-Tool for Working Wood Norway
- Machine-Tool for Working Wood Market
- Machine-Tool for Removing Material Market
- Horizontal Machining Centre Market
- Unit Construction Machine Market
- Multi-Station Transfer Machine Market
- Lathe for Removing Metal Market
- Non-Numerically Controlled Lathe Market
- Way-Type Unit Head Market
- Numerically Controlled Drilling Machine Market