ASEAN - Rigid Tubes, Pipes and Hoses, of Other Polymers - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingASEAN: Market for Rigid Tubes, Pipes and Hoses, of Other Polymers 2024
Market Size for Rigid Tubes, Pipes and Hoses, of Other Polymers in ASEAN
The ASEAN market for rigid tubes, pipes and hoses, of other polymers declined slightly to $X in 2023, which is down by X% against the previous year. In general, consumption recorded a noticeable shrinkage. The level of consumption peaked at $X in 2012; however, from 2013 to 2023, consumption remained at a lower figure.
Production of Rigid Tubes, Pipes and Hoses, of Other Polymers in ASEAN
In value terms, production of rigid tubes, pipes and hoses, of other polymers totaled $X in 2023 estimated in export price. Overall, production continues to indicate a mild decline. The most prominent rate of growth was recorded in 2019 when the production volume increased by X%. The level of production peaked at $X in 2012; however, from 2013 to 2023, production failed to regain momentum.
Exports of Rigid Tubes, Pipes and Hoses, of Other Polymers
Exports in ASEAN
In 2023, shipments abroad of rigid tubes, pipes and hoses, of other polymers was finally on the rise to reach X tons for the first time since 2020, thus ending a two-year declining trend. Total exports indicated a slight expansion from 2012 to 2023: its volume increased at an average annual rate of X% over the last eleven years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. The pace of growth appeared the most rapid in 2014 with an increase of X% against the previous year. The volume of export peaked at X tons in 2018; however, from 2019 to 2023, the exports stood at a somewhat lower figure.
In value terms, exports of rigid tubes, pipes and hoses, of other polymers shrank to $X in 2023. Total exports indicated a tangible expansion from 2012 to 2023: its value increased at an average annual rate of X% over the last eleven years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. The most prominent rate of growth was recorded in 2014 with an increase of X%. Over the period under review, the exports of attained the peak figure at $X in 2022, and then shrank in the following year.
Exports by Country
Thailand represented the largest exporter of rigid tubes, pipes and hoses, of other polymers in ASEAN, with the volume of exports reaching X tons, which was near X% of total exports in 2023. It was distantly followed by Vietnam (X tons), Indonesia (X tons), the Philippines (X tons) and Malaysia (X tons), together comprising a X% share of total exports. Singapore (X tons) took a minor share of total exports.
From 2012 to 2023, average annual rates of growth with regard to rigid tubes, pipes and hoses, of other polymers exports from Thailand stood at X%. At the same time, the Philippines (X%) and Vietnam (X%) displayed positive paces of growth. Moreover, the Philippines emerged as the fastest-growing exporter exported in ASEAN, with a CAGR of X% from 2012-2023. Indonesia experienced a relatively flat trend pattern. By contrast, Malaysia (X%) and Singapore (X%) illustrated a downward trend over the same period. While the share of the Philippines (X p.p.) and Vietnam (X p.p.) increased significantly in terms of the total exports from 2012-2023, the share of Indonesia (X p.p.), Singapore (X p.p.) and Malaysia (X p.p.) displayed negative dynamics. The shares of the other countries remained relatively stable throughout the analyzed period.
In value terms, Vietnam ($X), Thailand ($X) and Singapore ($X) constituted the countries with the highest levels of exports in 2023, together comprising X% of total exports.
Vietnam, with a CAGR of X%, saw the highest rates of growth with regard to the value of exports, among the main exporting countries over the period under review, while shipments for the other leaders experienced more modest paces of growth.
Export Prices by Country
In 2023, the export price in ASEAN amounted to $X per ton, declining by X% against the previous year. Export price indicated noticeable growth from 2012 to 2023: its price increased at an average annual rate of X% over the last eleven years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. The most prominent rate of growth was recorded in 2021 an increase of X%. Over the period under review, the export prices hit record highs at $X per ton in 2022, and then dropped markedly in the following year.
There were significant differences in the average prices amongst the major exporting countries. In 2023, amid the top suppliers, the country with the highest price was Vietnam ($X per ton), while the Philippines ($X per ton) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Thailand (X%), while the other leaders experienced more modest paces of growth.
Imports of Rigid Tubes, Pipes and Hoses, of Other Polymers
Imports in ASEAN
Imports of rigid tubes, pipes and hoses, of other polymers fell to X tons in 2023, dropping by X% on the previous year's figure. Over the period under review, imports saw a mild curtailment. The pace of growth appeared the most rapid in 2015 with an increase of X%. As a result, imports reached the peak of X tons. From 2016 to 2023, the growth of imports of remained at a lower figure.
In value terms, imports of rigid tubes, pipes and hoses, of other polymers declined rapidly to $X in 2023. In general, imports recorded a perceptible slump. The growth pace was the most rapid in 2021 with an increase of X% against the previous year. The level of import peaked at $X in 2012; however, from 2013 to 2023, imports remained at a lower figure.
Imports by Country
The purchases of the seven major importers of rigid tubes, pipes and hoses, of other polymers, namely Myanmar, Thailand, Malaysia, the Philippines, Indonesia, Vietnam and Cambodia, represented more than two-thirds of total import. It was distantly followed by Singapore (X tons), creating a X% share of total imports.
From 2012 to 2023, the biggest increases were recorded for Cambodia (with a CAGR of X%), while purchases for the other leaders experienced more modest paces of growth.
In value terms, Thailand ($X), Malaysia ($X) and Indonesia ($X) appeared to be the countries with the highest levels of imports in 2023, together comprising X% of total imports. Vietnam, the Philippines, Singapore, Cambodia and Myanmar lagged somewhat behind, together comprising a further X%.
In terms of the main importing countries, Cambodia, with a CAGR of X%, recorded the highest rates of growth with regard to the value of imports, over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
In 2023, the import price in ASEAN amounted to $X per ton, dropping by X% against the previous year. Overall, the import price saw a pronounced curtailment. The most prominent rate of growth was recorded in 2018 an increase of X%. The level of import peaked at $X per ton in 2012; however, from 2013 to 2023, import prices remained at a lower figure.
Prices varied noticeably by country of destination: amid the top importers, the country with the highest price was Malaysia ($X per ton), while Myanmar ($X per ton) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by the Philippines (X%), while the other leaders experienced more modest paces of growth.
Source: IndexBox Platform
This report provides an in-depth analysis of the market for rigid tubes, pipes and hoses, of other polymers in ASEAN. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 22212170 - Rigid tubes, pipes and hoses of plastics (excluding of polymers of ethylene, of polymers of propylene, of polymers of vinyl chloride)
Country coverage:
- Brunei Darussalam
- Cambodia
- Indonesia
- Lao People's Democratic Republic
- Malaysia
- Myanmar
- Philippines
- Singapore
- Thailand
- Vietnam
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in ASEAN, split by region and country
- Trade (exports and imports) in ASEAN
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Brunei Darussalam
- Cambodia
- Indonesia
- Malaysia
- Myanmar
- Philippines
- Singapore
- Thailand
- Vietnam
- Lao People's Democratic Republic
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for rigid tubes, pipes and hoses, of other polymers in Asia.
This report provides an in-depth analysis of the market for rigid tubes, pipes and hoses, of other polymers in the U.S..
This report provides an in-depth analysis of the market for rigid tubes, pipes and hoses, of other polymers in China.
This report provides an in-depth analysis of the market for rigid tubes, pipes and hoses, of other polymers in the EU.
This report provides an in-depth analysis of the global market for rigid tubes, pipes and hoses, of other polymers.