![Report Czech Republic - Machine Tools for Working Metal - Market Analysis, Forecast, Size, Trends and Insights for 499$](/landing/img/reports/czech-republic-machine-tools-for-working-metal-market-analysis-forecast-size-trends-and-insights.webp)
Czech Republic - Machine Tools for Working Metal - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingCzech Republic: Market for Machine Tools For Working Metal 2024
Market Size for Machine Tools For Working Metal in the Czech Republic
In 2022, the Czech machine-tool for working metal market increased by X% to $X for the first time since 2018, thus ending a three-year declining trend. In general, consumption enjoyed a modest increase. As a result, consumption attained the peak level of $X. From 2017 to 2022, the growth of the market failed to regain momentum.
Production of Machine Tools For Working Metal in the Czech Republic
In value terms, machine-tool for working metal production skyrocketed to $X in 2022 estimated in export price. In general, production showed a slight increase. Machine-tool for working metal production peaked at $X in 2018; however, from 2019 to 2022, production failed to regain momentum.
Exports of Machine Tools For Working Metal
Exports from the Czech Republic
Machine-tool for working metal exports from the Czech Republic declined to X units in 2022, dropping by X% on 2021 figures. In general, exports saw a abrupt setback. The most prominent rate of growth was recorded in 2013 when exports increased by X%. As a result, the exports reached the peak of X units. From 2014 to 2022, the growth of the exports remained at a somewhat lower figure.
In value terms, machine-tool for working metal exports skyrocketed to $X in 2022. Over the period under review, total exports indicated a moderate expansion from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, exports increased by X% against 2020 indices. The growth pace was the most rapid in 2013 when exports increased by X%. Over the period under review, the exports reached the maximum at $X in 2019; however, from 2020 to 2022, the exports failed to regain momentum.
Exports by Country
Germany (X units) was the main destination for machine-tool for working metal exports from the Czech Republic, accounting for a X% share of total exports. Moreover, machine-tool for working metal exports to Germany exceeded the volume sent to the second major destination, Slovakia (X units), twofold. The third position in this ranking was taken by the UK (X units), with an X% share.
From 2012 to 2022, the average annual rate of growth in terms of volume to Germany amounted to X%. Exports to the other major destinations recorded the following average annual rates of exports growth: Slovakia (X% per year) and the UK (X% per year).
In value terms, the largest markets for machine-tool for working metal exported from the Czech Republic were Russia ($X), Slovakia ($X) and the UK ($X), with a combined X% share of total exports. Germany, Poland, Hungary and Spain lagged somewhat behind, together comprising a further X%.
Spain, with a CAGR of X%, recorded the highest growth rate of the value of exports, among the main countries of destination over the period under review, while shipments for the other leaders experienced more modest paces of growth.
Export Prices by Country
The average machine-tool for working metal export price stood at $X per unit in 2022, with an increase of X% against the previous year. In general, the export price recorded a significant increase. The pace of growth appeared the most rapid in 2018 an increase of X%. Over the period under review, the average export prices reached the peak figure in 2022 and is expected to retain growth in years to come.
There were significant differences in the average prices for the major external markets. In 2022, amid the top suppliers, the country with the highest price was Russia ($X per unit), while the average price for exports to Spain ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was recorded for supplies to Poland (X%), while the prices for the other major destinations experienced more modest paces of growth.
Imports of Machine Tools For Working Metal
Imports into the Czech Republic
In 2022, the amount of machine tools for working metal imported into the Czech Republic expanded slightly to X units, picking up by X% on 2021. Overall, imports, however, saw a drastic downturn. The pace of growth appeared the most rapid in 2014 with an increase of X%. As a result, imports reached the peak of X units. From 2015 to 2022, the growth of imports remained at a lower figure.
In value terms, machine-tool for working metal imports surged to $X in 2022. In general, total imports indicated a mild expansion from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, imports increased by X% against 2020 indices. The growth pace was the most rapid in 2017 when imports increased by X% against the previous year. Over the period under review, imports attained the peak figure at $X in 2018; however, from 2019 to 2022, imports stood at a somewhat lower figure.
Imports by Country
In 2022, Poland (X units) constituted the largest supplier of machine-tool for working metal to the Czech Republic, with a X% share of total imports. Moreover, machine-tool for working metal imports from Poland exceeded the figures recorded by the second-largest supplier, Germany (X units), twofold. The UK (X units) ranked third in terms of total imports with a X% share.
From 2012 to 2022, the average annual growth rate of volume from Poland amounted to X%. The remaining supplying countries recorded the following average annual rates of imports growth: Germany (X% per year) and the UK (X% per year).
In value terms, the largest machine-tool for working metal suppliers to the Czech Republic were Germany ($X), Italy ($X) and Austria ($X), with a combined X% share of total imports. The United States, Slovenia, the UK, Turkey, the Netherlands, Poland, Slovakia and Romania lagged somewhat behind, together comprising a further X%.
Poland, with a CAGR of X%, recorded the highest rates of growth with regard to the value of imports, in terms of the main suppliers over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
The average machine-tool for working metal import price stood at $X per unit in 2022, with an increase of X% against the previous year. Over the period under review, the import price showed a resilient increase. The pace of growth appeared the most rapid in 2020 an increase of X%. As a result, import price attained the peak level of $X per unit. From 2021 to 2022, the average import prices remained at a somewhat lower figure.
Prices varied noticeably by country of origin: amid the top importers, the country with the highest price was Italy ($X per unit), while the price for Romania ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by the United States (X%), while the prices for the other major suppliers experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the market for machine-tool for working metal in the Czech Republic. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 28413120 - Numerically controlled bending, folding, straightening or flattening machines for working flat metal products (including presses)
- Prodcom 28413140 - Numerically controlled bending, folding, straightening or flattening machines for working metal (including presses) (excluding those for working flat metal products)
- Prodcom 28413160 - Non-numerically controlled bending, folding, straightening or flattening machines for working flat metal products (including presses)
- Prodcom 28413180 - Non-numerically controlled bending, folding, straightening or flattening machines for working metal (including presses) (excluding those for working flat metal products)
- Prodcom 28413220 - Numerically controlled shearing machines for working metal (including presses) (excluding combined punching and shearing machines)
- Prodcom 28413240 - Numerically controlled punching or notching machines for working metal (including presses, combined punching and shearing machines)
- Prodcom 28413260 - Non-numerically controlled shearing machines for working metal (including presses) (excluding combined punching and shearing machines)
- Prodcom 28413280 - Non-numerically controlled punching or notching machines for working metal (including presses, combined punching and shearing machines)
- Prodcom 28413310 - Numerically controlled forging or die-stamping machines and hammers for working metal (including presses)
- Prodcom 28413320 - Non-numerically controlled forging or die-stamping machines and hammers for working metal (including presses)
- Prodcom 28413330 -
- Prodcom 28413340 -
- Prodcom 28413370 -
- Prodcom 28413380 -
Country coverage:
- Czech Republic
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in the Czech Republic
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption In 2012-2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
- Trade Balance, In Physical Terms, 2012-2023
- Trade Balance, In Value Terms, 2012-2023
- Per Capita Consumption, 2012-2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for machine-tool for working metal in Asia.
This report provides an in-depth analysis of the market for machine-tool for working metal in the U.S..
This report provides an in-depth analysis of the market for machine-tool for working metal in China.
This report provides an in-depth analysis of the market for machine-tool for working metal in the EU.
This report provides an in-depth analysis of the global market for machine-tool for working metal.
- Market Research in the Czech Republic
- Price for Machine-Tool for Working Metal the Czech Republic
- Machine-Tool for Working Metal Market
- Machine-Tool for Removing Material Market
- Horizontal Machining Centre Market
- Unit Construction Machine Market
- Multi-Station Transfer Machine Market
- Lathe for Removing Metal Market
- Non-Numerically Controlled Lathe Market
- Way-Type Unit Head Market