![Report Finland - Injection or Compression Type Moulds for Rubber or Plastics - Market Analysis, Forecast, Size, Trends and Insights for 499$](/landing/img/reports/finland-injection-or-compression-type-moulds-for-rubber-or-plastics-market-analysis-forecast-size-trends-and-insights.webp)
Finland - Injection or Compression Type Moulds for Rubber or Plastics - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingFinland: Compression Type Mould Market 2024
Compression Type Mould Market Size in Finland
The Finnish compression type mould market contracted remarkably to $X in 2023, shrinking by X% against the previous year. In general, the total consumption indicated a noticeable increase from 2012 to 2023: its value increased at an average annual rate of X% over the last eleven years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, consumption increased by X% against 2021 indices. As a result, consumption reached the peak level of $X, and then fell sharply in the following year.
Compression Type Mould Production in Finland
In value terms, compression type mould production declined to $X in 2023 estimated in export price. The total output value increased at an average annual rate of X% from 2012 to 2023; however, the trend pattern indicated some noticeable fluctuations being recorded in certain years. The growth pace was the most rapid in 2013 with an increase of X% against the previous year. As a result, production attained the peak level of $X. From 2014 to 2023, production growth remained at a somewhat lower figure.
Compression Type Mould Exports
Exports from Finland
In 2023, exports of injection or compression type moulds for rubber or plastics from Finland rose slightly to X units, increasing by X% against the previous year. In general, exports continue to indicate a relatively flat trend pattern. The pace of growth was the most pronounced in 2021 when exports increased by X% against the previous year. As a result, the exports attained the peak of X units. From 2022 to 2023, the growth of the exports failed to regain momentum.
In value terms, compression type mould exports shrank to $X in 2023. Overall, exports, however, saw a deep downturn. The pace of growth was the most pronounced in 2021 with an increase of X% against the previous year. As a result, the exports attained the peak of $X. From 2022 to 2023, the growth of the exports failed to regain momentum.
Exports by Country
The United States (X units), Sweden (X units) and Estonia (X units) were the main destinations of compression type mould exports from Finland, with a combined X% share of total exports.
From 2012 to 2023, the biggest increases were recorded for the United States (with a CAGR of X%), while shipments for the other leaders experienced more modest paces of growth.
In value terms, the United States ($X) remains the key foreign market for injection or compression type moulds for rubber or plastics exports from Finland, comprising X% of total exports. The second position in the ranking was held by Sweden ($X), with an X% share of total exports. It was followed by Estonia, with a X% share.
From 2012 to 2023, the average annual rate of growth in terms of value to the United States totaled X%. Exports to the other major destinations recorded the following average annual rates of exports growth: Sweden (X% per year) and Estonia (X% per year).
Export Prices by Country
In 2023, the average compression type mould export price amounted to $X per unit, falling by X% against the previous year. In general, the export price recorded a abrupt decline. The pace of growth was the most pronounced in 2018 an increase of X%. The export price peaked at $X per unit in 2013; however, from 2014 to 2023, the export prices remained at a lower figure.
Prices varied noticeably by country of destination: amid the top suppliers, the country with the highest price was Denmark ($X per unit), while the average price for exports to Kazakhstan ($X per unit) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was recorded for supplies to Estonia (X%), while the prices for the other major destinations experienced a decline.
Compression Type Mould Imports
Imports into Finland
In 2023, overseas purchases of injection or compression type moulds for rubber or plastics decreased by X% to X units, falling for the second consecutive year after two years of growth. In general, total imports indicated a tangible increase from 2012 to 2023: its volume increased at an average annual rate of X% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, imports decreased by X% against 2021 indices. The most prominent rate of growth was recorded in 2014 when imports increased by X% against the previous year. Imports peaked at X units in 2021; however, from 2022 to 2023, imports failed to regain momentum.
In value terms, compression type mould imports shrank remarkably to $X in 2023. Over the period under review, imports showed a mild curtailment. The most prominent rate of growth was recorded in 2014 when imports increased by X%. As a result, imports reached the peak of $X. From 2015 to 2023, the growth of imports remained at a lower figure.
Imports by Country
In 2023, China (X units) constituted the largest compression type mould supplier to Finland, accounting for a X% share of total imports. Moreover, compression type mould imports from China exceeded the figures recorded by the second-largest supplier, Malaysia (X units), fourfold. Sweden (X units) ranked third in terms of total imports with a X% share.
From 2012 to 2023, the average annual growth rate of volume from China amounted to X%. The remaining supplying countries recorded the following average annual rates of imports growth: Malaysia (X% per year) and Sweden (X% per year).
In value terms, China ($X) constituted the largest supplier of injection or compression type moulds for rubber or plastics to Finland, comprising X% of total imports. The second position in the ranking was held by Germany ($X), with a X% share of total imports. It was followed by Malaysia, with a X% share.
From 2012 to 2023, the average annual growth rate of value from China totaled X%. The remaining supplying countries recorded the following average annual rates of imports growth: Germany (X% per year) and Malaysia (X% per year).
Import Prices by Country
In 2023, the average compression type mould import price amounted to $X per unit, declining by X% against the previous year. In general, the import price saw a noticeable curtailment. The most prominent rate of growth was recorded in 2015 an increase of X% against the previous year. As a result, import price reached the peak level of $X per unit. From 2016 to 2023, the average import prices remained at a lower figure.
Prices varied noticeably by country of origin: amid the top importers, the country with the highest price was Germany ($X per unit), while the price for Hungary ($X per unit) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Germany (X%), while the prices for the other major suppliers experienced more modest paces of growth.
Source: IndexBox Platform
This report provides an in-depth analysis of the compression type mould market in Finland. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 25735070 - Injection or compression type moulds for rubber or plastics
Country coverage:
- Finland
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in Finland
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption In 2012-2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
- Trade Balance, In Physical Terms, 2012-2023
- Trade Balance, In Value Terms, 2012-2023
- Per Capita Consumption, 2012-2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
Recommended reports
This report provides an in-depth analysis of the compression type mould market in Asia.
This report provides an in-depth analysis of the compression type mould market in the U.S..
This report provides an in-depth analysis of the compression type mould market in China.
This report provides an in-depth analysis of the compression type mould market in the EU.
This report provides an in-depth analysis of the global compression type mould market.