![Report Kenya - Injection or Compression Type Moulds for Rubber or Plastics - Market Analysis, Forecast, Size, Trends and Insights for 499$](/landing/img/reports/kenya-injection-or-compression-type-moulds-for-rubber-or-plastics-market-analysis-forecast-size-trends-and-insights.webp)
Kenya - Injection or Compression Type Moulds for Rubber or Plastics - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingKenya: Compression Type Mould Market 2024
Compression Type Mould Market Size in Kenya
The Kenyan compression type mould market dropped to $X in 2023, which is down by X% against the previous year. This figure reflects the total revenues of producers and importers (excluding logistics costs, retail marketing costs, and retailers' margins, which will be included in the final consumer price). Over the period under review, the total consumption indicated a measured increase from 2012 to 2023: its value increased at an average annual rate of X% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, consumption increased by X% against 2019 indices. Compression type mould consumption peaked at $X in 2022, and then declined in the following year.
Compression Type Mould Exports
Exports from Kenya
In 2023, shipments abroad of injection or compression type moulds for rubber or plastics decreased by X% to X units for the first time since 2020, thus ending a two-year rising trend. Over the period under review, exports, however, saw a strong expansion. The most prominent rate of growth was recorded in 2019 with an increase of X%. As a result, the exports attained the peak of X units. From 2020 to 2023, the growth of the exports failed to regain momentum.
In value terms, compression type mould exports plummeted to $X in 2023. In general, exports, however, recorded a prominent increase. The pace of growth was the most pronounced in 2019 when exports increased by X%. The exports peaked at $X in 2015; however, from 2016 to 2023, the exports remained at a lower figure.
Exports by Country
India (X units), Uganda (X units) and Madagascar (X units) were the main destinations of compression type mould exports from Kenya, with a combined X% share of total exports.
From 2012 to 2023, the most notable rate of growth in terms of shipments, amongst the main countries of destination, was attained by India (with a CAGR of X%), while the other leaders experienced more modest paces of growth.
In value terms, Switzerland ($X) emerged as the key foreign market for injection or compression type moulds for rubber or plastics exports from Kenya, comprising X% of total exports. The second position in the ranking was taken by India ($X), with a X% share of total exports. It was followed by South Africa, with an X% share.
From 2012 to 2023, the average annual rate of growth in terms of value to Switzerland totaled X%. Exports to the other major destinations recorded the following average annual rates of exports growth: India (X% per year) and South Africa (X% per year).
Export Prices by Country
The average compression type mould export price stood at $X per unit in 2023, waning by X% against the previous year. In general, the export price continues to indicate a deep downturn. The most prominent rate of growth was recorded in 2022 when the average export price increased by X% against the previous year. The export price peaked at $X per unit in 2015; however, from 2016 to 2023, the export prices stood at a somewhat lower figure.
Prices varied noticeably by country of destination: amid the top suppliers, the country with the highest price was Switzerland ($X per unit), while the average price for exports to Madagascar ($X per unit) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was recorded for supplies to Ethiopia (X%), while the prices for the other major destinations experienced more modest paces of growth.
Compression Type Mould Imports
Imports into Kenya
In 2023, imports of injection or compression type moulds for rubber or plastics into Kenya fell to X units, reducing by X% against the year before. In general, total imports indicated tangible growth from 2012 to 2023: its volume increased at an average annual rate of X% over the last eleven years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, imports increased by X% against 2019 indices. The most prominent rate of growth was recorded in 2020 with an increase of X%. Imports peaked at X units in 2022, and then contracted in the following year.
In value terms, compression type mould imports shrank to $X in 2023. Overall, imports continue to indicate a relatively flat trend pattern. The pace of growth was the most pronounced in 2020 when imports increased by X% against the previous year. Imports peaked at $X in 2022, and then dropped in the following year.
Imports by Country
China (X units), India (X units) and Taiwan (Chinese) (X units) were the main suppliers of compression type mould imports to Kenya, with a combined X% share of total imports. Hong Kong SAR, Italy and Germany lagged somewhat behind, together accounting for a further X%.
From 2012 to 2023, the biggest increases were recorded for Italy (with a CAGR of X%), while purchases for the other leaders experienced more modest paces of growth.
In value terms, the largest compression type mould suppliers to Kenya were China ($X), India ($X) and Taiwan (Chinese) ($X), with a combined X% share of total imports. Italy, Germany and Hong Kong SAR lagged somewhat behind, together comprising a further X%.
Hong Kong SAR, with a CAGR of X%, recorded the highest rates of growth with regard to the value of imports, in terms of the main suppliers over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
The average compression type mould import price stood at $X per unit in 2023, approximately equating the previous year. Over the period under review, the import price saw a perceptible curtailment. The most prominent rate of growth was recorded in 2014 an increase of X% against the previous year. As a result, import price reached the peak level of $X per unit. From 2015 to 2023, the average import prices remained at a somewhat lower figure.
There were significant differences in the average prices amongst the major supplying countries. In 2023, amid the top importers, the country with the highest price was Germany ($X per unit), while the price for Hong Kong SAR ($X per unit) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by India (X%), while the prices for the other major suppliers experienced mixed trend patterns.
Source: IndexBox Platform
This report provides an in-depth analysis of the compression type mould market in Kenya. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 25735070 - Injection or compression type moulds for rubber or plastics
Country coverage:
- Kenya
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in Kenya
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption In 2012-2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
- Trade Balance, In Physical Terms, 2012-2023
- Trade Balance, In Value Terms, 2012-2023
- Per Capita Consumption, 2012-2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
Recommended reports
This report provides an in-depth analysis of the compression type mould market in Asia.
This report provides an in-depth analysis of the compression type mould market in the U.S..
This report provides an in-depth analysis of the compression type mould market in China.
This report provides an in-depth analysis of the compression type mould market in the EU.
This report provides an in-depth analysis of the global compression type mould market.