![Report Poland - Moulded Rubber Articles - Market Analysis, Forecast, Size, Trends and Insights for 499$](/landing/img/reports/poland-moulded-rubber-articles-market-analysis-forecast-size-trends-and-insights.webp)
Poland - Moulded Rubber Articles - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingPoland: Market for Rubber-to-Metal and Moulded Articles 2024
Market Size for Rubber-to-Metal and Moulded Articles in Poland
The Polish rubber-to-metal and moulded article market skyrocketed to $X in 2023, growing by X% against the previous year. Over the period under review, the total consumption indicated a slight expansion from 2012 to 2023: its value increased at an average annual rate of X% over the last eleven years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, consumption increased by X% against 2016 indices. As a result, consumption reached the peak level and is likely to continue growth in the immediate term.
Production of Rubber-to-Metal and Moulded Articles in Poland
In value terms, rubber-to-metal and moulded article production amounted to $X in 2023 estimated in export price. The total output value increased at an average annual rate of X% from 2012 to 2023; however, the trend pattern remained consistent, with somewhat noticeable fluctuations being observed throughout the analyzed period. The pace of growth appeared the most rapid in 2017 with an increase of X%. Rubber-to-metal and moulded article production peaked at $X in 2018; however, from 2019 to 2023, production remained at a lower figure.
Exports of Rubber-to-Metal and Moulded Articles
Exports from Poland
In 2023, rubber-to-metal and moulded article exports from Poland amounted to X tons, surging by X% against 2022. Overall, total exports indicated perceptible growth from 2012 to 2023: its volume increased at an average annual rate of X% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, exports increased by X% against 2020 indices. The pace of growth was the most pronounced in 2017 with an increase of X%. Over the period under review, the exports hit record highs at X tons in 2018; however, from 2019 to 2023, the exports failed to regain momentum.
In value terms, rubber-to-metal and moulded article exports soared to $X in 2023. The total export value increased at an average annual rate of X% over the period from 2012 to 2023; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. The growth pace was the most rapid in 2013 when exports increased by X% against the previous year. Over the period under review, the exports hit record highs at $X in 2018; however, from 2019 to 2023, the exports failed to regain momentum.
Exports by Country
Germany (X tons) was the main destination for rubber-to-metal and moulded article exports from Poland, accounting for a X% share of total exports. Moreover, rubber-to-metal and moulded article exports to Germany exceeded the volume sent to the second major destination, the Czech Republic (X tons), fivefold. The third position in this ranking was taken by France (X tons), with a X% share.
From 2012 to 2023, the average annual rate of growth in terms of volume to Germany amounted to X%. Exports to the other major destinations recorded the following average annual rates of exports growth: the Czech Republic (X% per year) and France (X% per year).
In value terms, Germany ($X) remains the key foreign market for rubber-to-metal and moulded articles exports from Poland, comprising X% of total exports. The second position in the ranking was held by the Czech Republic ($X), with a X% share of total exports. It was followed by the UK, with a X% share.
From 2012 to 2023, the average annual growth rate of value to Germany stood at X%. Exports to the other major destinations recorded the following average annual rates of exports growth: the Czech Republic (X% per year) and the UK (X% per year).
Export Prices by Country
In 2023, the average rubber-to-metal and moulded article export price amounted to $X per ton, with an increase of X% against the previous year. Overall, the export price continues to indicate a relatively flat trend pattern. Over the period under review, the average export prices attained the maximum at $X per ton in 2013; however, from 2014 to 2023, the export prices failed to regain momentum.
Prices varied noticeably by country of destination: amid the top suppliers, the country with the highest price was Slovakia ($X per ton), while the average price for exports to Norway ($X per ton) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was recorded for supplies to Norway (X%), while the prices for the other major destinations experienced more modest paces of growth.
Imports of Rubber-to-Metal and Moulded Articles
Imports into Poland
In 2023, rubber-to-metal and moulded article imports into Poland rose remarkably to X tons, surging by X% against the year before. The total import volume increased at an average annual rate of X% over the period from 2012 to 2023; however, the trend pattern indicated some noticeable fluctuations being recorded in certain years. The most prominent rate of growth was recorded in 2013 when imports increased by X% against the previous year. Imports peaked in 2023 and are likely to see gradual growth in the near future.
In value terms, rubber-to-metal and moulded article imports surged to $X in 2023. In general, total imports indicated resilient growth from 2012 to 2023: its value increased at an average annual rate of X% over the last eleven years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, imports increased by X% against 2020 indices. As a result, imports reached the peak and are likely to continue growth in the immediate term.
Imports by Country
In 2023, Germany (X tons) constituted the largest rubber-to-metal and moulded article supplier to Poland, accounting for a X% share of total imports. Moreover, rubber-to-metal and moulded article imports from Germany exceeded the figures recorded by the second-largest supplier, China (X tons), twofold. The third position in this ranking was taken by Italy (X tons), with a X% share.
From 2012 to 2023, the average annual growth rate of volume from Germany totaled X%. The remaining supplying countries recorded the following average annual rates of imports growth: China (X% per year) and Italy (X% per year).
In value terms, Germany ($X) constituted the largest supplier of rubber-to-metal and moulded articles to Poland, comprising X% of total imports. The second position in the ranking was held by Italy ($X), with an X% share of total imports. It was followed by China, with a X% share.
From 2012 to 2023, the average annual rate of growth in terms of value from Germany amounted to X%. The remaining supplying countries recorded the following average annual rates of imports growth: Italy (X% per year) and China (X% per year).
Import Prices by Country
The average rubber-to-metal and moulded article import price stood at $X per ton in 2023, rising by X% against the previous year. In general, the import price continues to indicate a relatively flat trend pattern. As a result, import price reached the peak level and is likely to continue growth in the immediate term.
Prices varied noticeably by country of origin: amid the top importers, the country with the highest price was Germany ($X per ton), while the price for Thailand ($X per ton) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Germany (X%), while the prices for the other major suppliers experienced more modest paces of growth.
Source: IndexBox Platform
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in Poland. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 22197345 - Rubber-to-metal bonded articles for tractors and motor vehicles
- Prodcom 2297347 -
- Prodcom 22197349 - Rubber-to-metal bonded articles for other uses than for tractors and motor vehicles
- Prodcom 22197365 - Articles of vulcanised solid rubber other than for tractors and motor vehicles
Country coverage:
- Poland
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in Poland
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption In 2012-2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
- Trade Balance, In Physical Terms, 2012-2023
- Trade Balance, In Value Terms, 2012-2023
- Per Capita Consumption, 2012-2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in Asia.
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in the U.S..
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in China.
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in the EU.
This report provides an in-depth analysis of the global market for rubber-to-metal and moulded article.
- Market Research in Poland
- Price for Rubber-To-Metal and Moulded Article Poland
- Rubber-To-Metal and Moulded Article Market
- Frozen and Fresh or Chilled Skipjack Tuna Market
- Frozen Market
- Frozen Scallops Market
- Jellyfish Market
- Non-Citrus Fruits not Elsewhere Classified Market
- Battered Fish Fillet Market
- Fluorine, Chlorine, Bromine and Iodine Market