Poland - Iron, Steel or Aluminium Reservoirs, Tanks, Vats and Similar Containers - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingPoland: Market for Iron, Steel Or Aluminium Reservoirs, Tanks, Vats And Similar Containers 2024
Market Size for Iron, Steel Or Aluminium Reservoirs, Tanks, Vats And Similar Containers in Poland
In 2020, the Polish market for iron, steel or aluminium reservoirs, tanks, vats and similar containers decreased by X% to $X, falling for the second consecutive year after two years of growth. Overall, consumption showed a relatively flat trend pattern. Over the period under review, the market hit record highs at $X in 2018; however, from 2019 to 2020, consumption failed to regain momentum.
Production of Iron, Steel Or Aluminium Reservoirs, Tanks, Vats And Similar Containers in Poland
In value terms, iron, steel or aluminium reservoir production reduced to $X in 2020 estimated in export price. Overall, production recorded a relatively flat trend pattern. The growth pace was the most rapid in 2017 with an increase of X% against the previous year. Over the period under review, production reached the peak level at $X in 2018; however, from 2019 to 2020, production failed to regain momentum.
Exports of Iron, Steel Or Aluminium Reservoirs, Tanks, Vats And Similar Containers
Exports from Poland
In 2020, the amount of iron, steel or aluminium reservoirs, tanks, vats and similar containers exported from Poland was estimated at X units, approximately mirroring the previous year. Overall, exports posted pronounced growth. The most prominent rate of growth was recorded in 2019 when exports increased by X% against the previous year. Over the period under review, the exports attained the maximum in 2020 and are likely to see gradual growth in years to come.
In value terms, iron, steel or aluminium reservoir exports declined to $X in 2020. Over the period under review, total exports indicated a notable expansion from 2012 to 2020: its value increased at an average annual rate of X% over the last eight years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2020 figures, exports increased by X% against 2016 indices. The growth pace was the most rapid in 2019 with an increase of X% against the previous year. As a result, the exports attained the peak of $X, and then dropped in the following year.
Exports by Country
Germany (X units) was the main destination for iron, steel or aluminium reservoir exports from Poland, with a X% share of total exports. Moreover, iron, steel or aluminium reservoir exports to Germany exceeded the volume sent to the second major destination, Sweden (X units), threefold. The third position in this ranking was held by Russia (X units), with a X% share.
From 2012 to 2020, the average annual growth rate of volume to Germany amounted to X%. Exports to the other major destinations recorded the following average annual rates of exports growth: Sweden (X% per year) and Russia (X% per year).
In value terms, Germany ($X) remains the key foreign market for iron, steel or aluminium reservoirs, tanks, vats and similar containers exports from Poland, comprising X% of total exports. The second position in the ranking was held by Sweden ($X), with a X% share of total exports. It was followed by the Czech Republic, with a X% share.
From 2012 to 2020, the average annual rate of growth in terms of value to Germany totaled X%. Exports to the other major destinations recorded the following average annual rates of exports growth: Sweden (X% per year) and the Czech Republic (X% per year).
Export Prices by Country
The average export price for iron, steel or aluminium reservoirs, tanks, vats and similar containers stood at $X per unit in 2020, dropping by X% against the previous year. In general, the export price saw a relatively flat trend pattern. The growth pace was the most rapid in 2018 an increase of X%. As a result, the export price attained the peak level of $X per unit. From 2019 to 2020, the average export prices remained at a lower figure.
There were significant differences in the average prices for the major export markets. In 2020, amid the top suppliers, the country with the highest price was the Netherlands ($X per unit), while the average price for exports to Russia ($X per unit) was amongst the lowest.
From 2012 to 2020, the most notable rate of growth in terms of prices was recorded for supplies to the Netherlands (X%), while the prices for the other major destinations experienced more modest paces of growth.
Imports of Iron, Steel Or Aluminium Reservoirs, Tanks, Vats And Similar Containers
Imports into Poland
In 2020, overseas purchases of iron, steel or aluminium reservoirs, tanks, vats and similar containers increased by X% to X units, rising for the fourth year in a row after two years of decline. In general, total imports indicated a prominent increase from 2012 to 2020: its volume increased at an average annual rate of X% over the last eight years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2020 figures, imports increased by X% against 2016 indices. The pace of growth appeared the most rapid in 2018 with an increase of X% against the previous year. Imports peaked in 2020 and are expected to retain growth in years to come.
In value terms, iron, steel or aluminium reservoir imports amounted to $X in 2020. Over the period under review, total imports indicated resilient growth from 2012 to 2020: its value increased at an average annual rate of X% over the last eight years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2020 figures, imports increased by X% against 2016 indices. The most prominent rate of growth was recorded in 2018 when imports increased by X%. Imports peaked in 2020 and are likely to see steady growth in years to come.
Imports by Country
The Czech Republic (X units), China (X units) and Germany (X units) were the main suppliers of iron, steel or aluminium reservoir imports to Poland, with a combined X% share of total imports. Turkey, Slovakia, Italy, Belgium, Spain, France, Bulgaria, Austria and Sweden lagged somewhat behind, together comprising a further X%.
From 2012 to 2020, the most notable rate of growth in terms of purchases, amongst the main suppliers, was attained by Slovakia (with a CAGR of X%), while imports for the other leaders experienced more modest paces of growth.
In value terms, the largest iron, steel or aluminium reservoir suppliers to Poland were the Czech Republic ($X), Germany ($X) and China ($X), together comprising X% of total imports. Turkey, Slovakia, Italy, Belgium, France, Sweden, Bulgaria, Spain and Austria lagged somewhat behind, together accounting for a further X%.
Among the main suppliers, Slovakia, with a CAGR of X%, saw the highest growth rate of the value of imports, over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
The average import price for iron, steel or aluminium reservoirs, tanks, vats and similar containers stood at $X per unit in 2020, almost unchanged from the previous year. In general, the import price, however, saw a slight shrinkage. The most prominent rate of growth was recorded in 2018 when the average import price increased by X% against the previous year. The import price peaked at $X per unit in 2013; however, from 2014 to 2020, import prices stood at a somewhat lower figure.
Prices varied noticeably by country of origin: amid the top importers, the country with the highest price was Sweden ($X per unit), while the price for China ($X per unit) was amongst the lowest.
From 2012 to 2020, the most notable rate of growth in terms of prices was attained by Sweden (X%), while the prices for the other major suppliers experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the market for iron, steel or aluminium reservoir in Poland. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 25291110 - Iron or steel reservoirs, tanks, vats and similar containers for gases, of a capacity > .300 litres (excluding compressed or liquefied gas, fitted with mechanical or thermal equipment)
- Prodcom 25291120 - Iron or steel reservoirs, tanks, vats and similar containers lined or heat-insulated, for liquids, of a capacity > .300 litres (excluding fitted with mechanical or thermal equipment)
- Prodcom 25291130 - Iron or steel reservoirs, tanks, vats and similar containers for liquids, of a capacity > .300 litres (excluding fitted with mechanical or thermal equipment, lined or heat insulated)
- Prodcom 25291150 - Iron or steel reservoirs, tanks, vats and similar containers for solids, of a capacity > .300 litres (excluding fitted with mechanical or thermal equipment)
- Prodcom 25291170 - Aluminium reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of a capacity > .300 litres (excluding fitted with mechanical or thermal equipment)
- Prodcom 25291200 - Containers for compressed or liquefied gas, of metal
Country coverage:
- Poland
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in Poland
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption In 2012-2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
- Trade Balance, In Physical Terms, 2012-2023
- Trade Balance, In Value Terms, 2012-2023
- Per Capita Consumption, 2012-2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for iron, steel or aluminium reservoir in Asia.
This report provides an in-depth analysis of the market for iron, steel or aluminium reservoir in the U.S..
This report provides an in-depth analysis of the market for iron, steel or aluminium reservoir in China.
This report provides an in-depth analysis of the market for iron, steel or aluminium reservoir in the EU.
This report provides an in-depth analysis of the global market for iron, steel or aluminium reservoir.