Sweden - Moulded Rubber Articles - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingSweden: Market for Rubber-to-Metal and Moulded Articles 2024
Market Size for Rubber-to-Metal and Moulded Articles in Sweden
The Swedish rubber-to-metal and moulded article market totaled $X in 2023, surging by X% against the previous year. Over the period under review, the total consumption indicated resilient growth from 2012 to 2023: its value increased at an average annual rate of X% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, consumption increased by X% against 2021 indices. Over the period under review, the market attained the peak level in 2023 and is expected to retain growth in the immediate term.
Production of Rubber-to-Metal and Moulded Articles in Sweden
In value terms, rubber-to-metal and moulded article production dropped slightly to $X in 2023 estimated in export price. In general, production recorded a relatively flat trend pattern. The most prominent rate of growth was recorded in 2019 when the production volume increased by X%. Over the period under review, production reached the peak level at $X in 2020; however, from 2021 to 2023, production remained at a lower figure.
Exports of Rubber-to-Metal and Moulded Articles
Exports from Sweden
For the fifth consecutive year, Sweden recorded decline in shipments abroad of rubber-to-metal and moulded articles, which decreased by X% to X tons in 2023. In general, exports continue to indicate a deep setback. The most prominent rate of growth was recorded in 2014 when exports increased by X% against the previous year. The exports peaked at X tons in 2015; however, from 2016 to 2023, the exports stood at a somewhat lower figure.
In value terms, rubber-to-metal and moulded article exports declined to $X in 2023. Over the period under review, exports recorded a noticeable descent. The most prominent rate of growth was recorded in 2021 with an increase of X%. Over the period under review, the exports hit record highs at $X in 2014; however, from 2015 to 2023, the exports failed to regain momentum.
Exports by Country
Norway (X tons), Italy (X tons) and the United States (X tons) were the main destinations of rubber-to-metal and moulded article exports from Sweden, together accounting for X% of total exports. The UK, Finland, Germany, the Netherlands, Mexico, Austria, Spain, Romania, China and Belgium lagged somewhat behind, together accounting for a further X%.
From 2012 to 2023, the most notable rate of growth in terms of shipments, amongst the main countries of destination, was attained by Mexico (with a CAGR of X%), while the other leaders experienced more modest paces of growth.
In value terms, the largest markets for rubber-to-metal and moulded article exported from Sweden were Italy ($X), the United States ($X) and Norway ($X), together comprising X% of total exports. The UK, Germany, Mexico, Finland, China, the Netherlands, Belgium, Romania, Spain and Austria lagged somewhat behind, together comprising a further X%.
Mexico, with a CAGR of X%, saw the highest rates of growth with regard to the value of exports, among the main countries of destination over the period under review, while shipments for the other leaders experienced more modest paces of growth.
Export Prices by Country
The average rubber-to-metal and moulded article export price stood at $X per ton in 2023, picking up by X% against the previous year. Overall, export price indicated a pronounced increase from 2012 to 2023: its price increased at an average annual rate of X% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, rubber-to-metal and moulded article export price increased by X% against 2017 indices. The pace of growth appeared the most rapid in 2017 when the average export price increased by X%. The export price peaked in 2023 and is likely to see steady growth in the immediate term.
There were significant differences in the average prices for the major external markets. In 2023, amid the top suppliers, the country with the highest price was Mexico ($X per ton), while the average price for exports to Norway ($X per ton) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was recorded for supplies to the United States (X%), while the prices for the other major destinations experienced more modest paces of growth.
Imports of Rubber-to-Metal and Moulded Articles
Imports into Sweden
In 2023, overseas purchases of rubber-to-metal and moulded articles increased by X% to X tons, rising for the second consecutive year after two years of decline. Overall, total imports indicated a remarkable increase from 2012 to 2023: its volume increased at an average annual rate of X% over the last eleven years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, imports increased by X% against 2021 indices. The pace of growth was the most pronounced in 2013 with an increase of X%. Over the period under review, imports reached the maximum at X tons in 2019; however, from 2020 to 2023, imports failed to regain momentum.
In value terms, rubber-to-metal and moulded article imports surged to $X in 2023. Over the period under review, total imports indicated a remarkable increase from 2012 to 2023: its value increased at an average annual rate of X% over the last eleven years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, imports increased by X% against 2020 indices. As a result, imports reached the peak and are likely to continue growth in the immediate term.
Imports by Country
Germany (X tons), Poland (X tons) and Finland (X tons) were the main suppliers of rubber-to-metal and moulded article imports to Sweden, with a combined X% share of total imports. China, Belgium, the Netherlands, India, Slovakia, France, Lithuania, Spain, the Czech Republic and Denmark lagged somewhat behind, together accounting for a further X%.
From 2012 to 2023, the biggest increases were recorded for Slovakia (with a CAGR of X%), while purchases for the other leaders experienced more modest paces of growth.
In value terms, Germany ($X), Poland ($X) and Finland ($X) constituted the largest rubber-to-metal and moulded article suppliers to Sweden, together comprising X% of total imports. Belgium, Denmark, China, the Netherlands, Lithuania, France, India, Slovakia, Spain and the Czech Republic lagged somewhat behind, together accounting for a further X%.
In terms of the main suppliers, Slovakia, with a CAGR of X%, recorded the highest rates of growth with regard to the value of imports, over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
In 2023, the average rubber-to-metal and moulded article import price amounted to $X per ton, surging by X% against the previous year. Over the period from 2012 to 2023, it increased at an average annual rate of X%. The growth pace was the most rapid in 2021 when the average import price increased by X%. The import price peaked in 2023 and is likely to see gradual growth in years to come.
Prices varied noticeably by country of origin: amid the top importers, the country with the highest price was Denmark ($X per ton), while the price for the Czech Republic ($X per ton) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Denmark (X%), while the prices for the other major suppliers experienced more modest paces of growth.
Source: IndexBox Platform
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in Sweden. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 22197345 - Rubber-to-metal bonded articles for tractors and motor vehicles
- Prodcom 2297347 -
- Prodcom 22197349 - Rubber-to-metal bonded articles for other uses than for tractors and motor vehicles
- Prodcom 22197365 - Articles of vulcanised solid rubber other than for tractors and motor vehicles
Country coverage:
- Sweden
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in Sweden
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption In 2012-2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
- Trade Balance, In Physical Terms, 2012-2023
- Trade Balance, In Value Terms, 2012-2023
- Per Capita Consumption, 2012-2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in Asia.
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in the U.S..
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in China.
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in the EU.
This report provides an in-depth analysis of the global market for rubber-to-metal and moulded article.
- Price for Rubber-To-Metal and Moulded Article Sweden
- Rubber-To-Metal and Moulded Article Market
- Frozen and Fresh or Chilled Skipjack Tuna Market
- Frozen Market
- Frozen Scallops Market
- Jellyfish Market
- Non-Citrus Fruits not Elsewhere Classified Market
- Battered Fish Fillet Market
- Fluorine, Chlorine, Bromine and Iodine Market
- Crispbread Market