Asia-Pacific - Tube or Pipe Fittings (Of Iron or Steel) - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingAsia-Pacific: Market for Tube Or Pipe Fittings (Of Iron Or Steel) 2024
Market Size for Tube Or Pipe Fittings (Of Iron Or Steel) in Asia-Pacific
After two years of growth, the Asia-Pacific market for tube or pipe fittings (of iron or steel) decreased by X% to $X in 2022. The market value increased at an average annual rate of X% from 2012 to 2022; however, the trend pattern indicated some noticeable fluctuations being recorded in certain years. The level of consumption peaked at $X in 2021, and then fell in the following year.
Production of Tube Or Pipe Fittings (Of Iron Or Steel) in Asia-Pacific
In value terms, iron or steel tube fitting production amounted to $X in 2022 estimated in export price. The total output value increased at an average annual rate of X% from 2012 to 2022; however, the trend pattern remained relatively stable, with only minor fluctuations throughout the analyzed period. The pace of growth was the most pronounced in 2018 when the production volume increased by X%. As a result, production reached the peak level of $X. From 2019 to 2022, production growth remained at a lower figure.
Exports of Tube Or Pipe Fittings (Of Iron Or Steel)
Exports in Asia-Pacific
In 2022, overseas shipments of tube or pipe fittings (of iron or steel) increased by X% to X tons, rising for the second consecutive year after two years of decline. Overall, exports, however, saw a relatively flat trend pattern. The most prominent rate of growth was recorded in 2017 with an increase of X%. Over the period under review, the exports hit record highs at X tons in 2018; however, from 2019 to 2022, the exports failed to regain momentum.
In value terms, iron or steel tube fitting exports soared to $X in 2022. The total export value increased at an average annual rate of X% over the period from 2012 to 2022; the trend pattern indicated some noticeable fluctuations being recorded in certain years. The growth pace was the most rapid in 2021 with an increase of X%. Over the period under review, the exports hit record highs in 2022 and are likely to see gradual growth in the near future.
Exports by Country
In 2022, China (X tons) was the main exporter of tube or pipe fittings (of iron or steel), making up X% of total exports. India (X tons) took a X% share (based on physical terms) of total exports, which put it in second place, followed by South Korea (X%). The following exporters - Malaysia (X tons), Taiwan (Chinese) (X tons), Thailand (X tons) and Singapore (X tons) - together made up X% of total exports.
China experienced a relatively flat trend pattern with regard to volume of exports of tube or pipe fittings (of iron or steel). At the same time, India (X%) and Malaysia (X%) displayed positive paces of growth. Moreover, India emerged as the fastest-growing exporter exported in Asia-Pacific, with a CAGR of X% from 2012-2022. By contrast, Thailand (X%), Taiwan (Chinese) (X%), South Korea (X%) and Singapore (X%) illustrated a downward trend over the same period. India (X p.p.) significantly strengthened its position in terms of the total exports, while South Korea saw its share reduced by X% from 2012 to 2022, respectively. The shares of the other countries remained relatively stable throughout the analyzed period.
In value terms, China ($X) remains the largest iron or steel tube fitting supplier in Asia-Pacific, comprising X% of total exports. The second position in the ranking was held by South Korea ($X), with an X% share of total exports. It was followed by India, with a X% share.
In China, iron or steel tube fitting exports expanded at an average annual rate of X% over the period from 2012-2022. In the other countries, the average annual rates were as follows: South Korea (X% per year) and India (X% per year).
Export Prices by Country
The export price in Asia-Pacific stood at $X per ton in 2022, increasing by X% against the previous year. Over the last decade, it increased at an average annual rate of X%. The pace of growth was the most pronounced in 2021 an increase of X%. Over the period under review, the export prices attained the maximum in 2022 and is expected to retain growth in the near future.
There were significant differences in the average prices amongst the major exporting countries. In 2022, amid the top suppliers, the country with the highest price was South Korea ($X per ton), while Malaysia ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Singapore (X%), while the other leaders experienced more modest paces of growth.
Imports of Tube Or Pipe Fittings (Of Iron Or Steel)
Imports in Asia-Pacific
In 2022, supplies from abroad of tube or pipe fittings (of iron or steel) increased by X% to X tons, rising for the second year in a row after two years of decline. In general, imports, however, recorded a relatively flat trend pattern. The most prominent rate of growth was recorded in 2013 with an increase of X%. As a result, imports reached the peak of X tons. From 2014 to 2022, the growth of imports remained at a lower figure.
In value terms, iron or steel tube fitting imports rose significantly to $X in 2022. Overall, imports continue to indicate a modest expansion. The most prominent rate of growth was recorded in 2018 when imports increased by X% against the previous year. Over the period under review, imports hit record highs in 2022 and are likely to see gradual growth in the near future.
Imports by Country
The purchases of the twelve major importers of tube or pipe fittings (of iron or steel), namely Japan, Singapore, South Korea, Malaysia, India, Indonesia, Taiwan (Chinese), Thailand, Pakistan, Australia, Hong Kong SAR and China, represented more than two-thirds of total import.
From 2012 to 2022, the most notable rate of growth in terms of purchases, amongst the leading importing countries, was attained by India (with a CAGR of X%), while imports for the other leaders experienced more modest paces of growth.
In value terms, the largest iron or steel tube fitting importing markets in Asia-Pacific were China ($X), Japan ($X) and South Korea ($X), with a combined X% share of total imports. Singapore, Thailand, Australia, India, Taiwan (Chinese), Malaysia, Indonesia, Hong Kong SAR and Pakistan lagged somewhat behind, together comprising a further X%.
Taiwan (Chinese), with a CAGR of X%, saw the highest rates of growth with regard to the value of imports, in terms of the main importing countries over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
The import price in Asia-Pacific stood at $X per ton in 2022, surging by X% against the previous year. Over the period from 2012 to 2022, it increased at an average annual rate of X%. The most prominent rate of growth was recorded in 2018 when the import price increased by X%. The level of import peaked in 2022 and is likely to see gradual growth in years to come.
Prices varied noticeably by country of destination: amid the top importers, the country with the highest price was China ($X per ton), while Pakistan ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Australia (X%), while the other leaders experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the market for iron or steel tube fitting in Asia-Pacific. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 24204010 - Flanges, of steel (excluding cast fittings)
- Prodcom 24204030 - Elbows, bends, couplings, sleeves and other threaded tube or pipe fittings, of steel (excluding cast fittings)
- Prodcom 24204050 - Elbows, bends, couplings and sleeves and other socket welding tube or pipe fittings, of steel (excluding cast fittings)
- Prodcom 24204073 - Butt welding elbows and bends, for tubes or pipes, of steel (excluding cast fittings)
- Prodcom 24204075 - Butt welding tube or pipe fittings, other than elbows and bends, of steel (excluding cast fittings)
- Prodcom 24513030 - Tube or pipe fittings, of non-malleable cast iron
- Prodcom 24513050 - Tube or pipe fittings of malleable cast iron
- Prodcom 24523000 - Tube or pipe fittings of cast steel
Country coverage:
- Afghanistan
- American Samoa
- Australia
- Bangladesh
- Bhutan
- Brunei Darussalam
- Cambodia
- China
- Cook Islands
- Democratic People's Republic of Korea
- Fiji
- French Polynesia
- Guam
- Hong Kong SAR
- India
- Indonesia
- Japan
- Kiribati
- Lao People's Democratic Republic
- Macao SAR
- Malaysia
- Maldives
- Marshall Islands
- Micronesia
- Myanmar
- Nauru
- Nepal
- New Caledonia
- New Zealand
- Niue
- Northern Mariana Islands
- Pakistan
- Palau
- Papua New Guinea
- Philippines
- Samoa
- Singapore
- Solomon Islands
- South Korea
- Sri Lanka
- Taiwan (Chinese)
- Thailand
- Timor-Leste
- Tokelau
- Tonga
- Tuvalu
- Vanuatu
- Vietnam
- Wallis and Futuna Islands
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in Asia-Pacific, split by region and country
- Trade (exports and imports) in Asia-Pacific
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Afghanistan
- Australia
- Bangladesh
- Bhutan
- Brunei Darussalam
- Cambodia
- China
- Hong Kong SAR
- Macao SAR
- Cook Islands
- Fiji
- French Polynesia
- India
- Indonesia
- Japan
- Kiribati
- Malaysia
- Maldives
- Marshall Islands
- Micronesia
- Myanmar
- Nepal
- New Caledonia
- New Zealand
- Northern Mariana Islands
- Pakistan
- Palau
- Papua New Guinea
- Philippines
- Samoa
- Singapore
- Solomon Islands
- South Korea
- Sri Lanka
- Taiwan (Chinese)
- Thailand
- Timor-Leste
- Tokelau
- Tonga
- Tuvalu
- Vanuatu
- Vietnam
- Wallis and Futuna Islands
- Lao People's Democratic Republic
- American Samoa
- Democratic People's Republic of Korea
- Nauru
- Niue
- Guam
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for iron or steel tube fitting in Asia.
This report provides an in-depth analysis of the market for iron or steel tube fitting in the U.S..
This report provides an in-depth analysis of the market for iron or steel tube fitting in China.
This report provides an in-depth analysis of the market for iron or steel tube fitting in the EU.
This report provides an in-depth analysis of the global market for iron or steel tube fitting.