Indonesia - Tubes, Pipes and Hollow Profiles (Of Iron or Steel) - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingIndonesia: Market for Tubes, Pipes And Hollow Profiles (Of Iron Or Steel) 2024
Market Size for Tubes, Pipes And Hollow Profiles (Of Iron Or Steel) in Indonesia
The Indonesian market for tubes, pipes and hollow profiles (of iron or steel) dropped modestly to $X in 2023, falling by X% against the previous year. Over the period under review, the total consumption indicated notable growth from 2012 to 2023: its value increased at an average annual rate of X% over the last eleven years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, consumption increased by X% against 2021 indices. Consumption of peaked at $X in 2019; however, from 2020 to 2023, consumption stood at a somewhat lower figure.
Production of Tubes, Pipes And Hollow Profiles (Of Iron Or Steel) in Indonesia
In value terms, production of tubes, pipes and hollow profiles (of iron or steel) stood at $X in 2023 estimated in export price. In general, the total production indicated a pronounced increase from 2012 to 2023: its value increased at an average annual rate of X% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, production increased by X% against 2020 indices. The growth pace was the most rapid in 2018 with an increase of X%. Over the period under review, production of reached the maximum level at $X in 2019; however, from 2020 to 2023, production stood at a somewhat lower figure.
Exports of Tubes, Pipes And Hollow Profiles (Of Iron Or Steel)
Exports from Indonesia
In 2023, the amount of tubes, pipes and hollow profiles (of iron or steel) exported from Indonesia shrank to X tons, waning by X% compared with 2022 figures. Overall, exports saw a deep setback. The most prominent rate of growth was recorded in 2018 with an increase of X% against the previous year. The exports peaked at X tons in 2012; however, from 2013 to 2023, the exports failed to regain momentum.
In value terms, exports of tubes, pipes and hollow profiles (of iron or steel) reduced remarkably to $X in 2023. In general, exports saw a abrupt setback. The most prominent rate of growth was recorded in 2018 when exports increased by X%. Over the period under review, the exports of attained the peak figure at $X in 2012; however, from 2013 to 2023, the exports failed to regain momentum.
Exports by Country
Singapore (X tons) was the main destination for exports of tubes, pipes and hollow profiles (of iron or steel) from Indonesia, accounting for a X% share of total exports. Moreover, exports of tubes, pipes and hollow profiles (of iron or steel) to Singapore exceeded the volume sent to the second major destination, the United Arab Emirates (X tons), threefold. The third position in this ranking was taken by Kuwait (X tons), with a X% share.
From 2012 to 2023, the average annual growth rate of volume to Singapore totaled X%. Exports to the other major destinations recorded the following average annual rates of exports growth: the United Arab Emirates (X% per year) and Kuwait (X% per year).
In value terms, the largest markets for iron or steel pipe and tube exported from Indonesia were Singapore ($X), the United Arab Emirates ($X) and Australia ($X), with a combined X% share of total exports. Norway, Kuwait, Japan, the United States, Canada, Thailand, Malaysia, Qatar, the Netherlands and Myanmar lagged somewhat behind, together comprising a further X%.
Kuwait, with a CAGR of X%, saw the highest rates of growth with regard to the value of exports, in terms of the main countries of destination over the period under review, while shipments for the other leaders experienced more modest paces of growth.
Export Prices by Country
In 2023, the average export price for tubes, pipes and hollow profiles (of iron or steel) amounted to $X per ton, reducing by X% against the previous year. In general, export price indicated a notable expansion from 2012 to 2023: its price increased at an average annual rate of X% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, export price for tubes, pipes and hollow profiles (of iron or steel) increased by X% against 2020 indices. The pace of growth was the most pronounced in 2018 an increase of X% against the previous year. The export price peaked at $X per ton in 2022, and then declined in the following year.
Prices varied noticeably by country of destination: amid the top suppliers, the country with the highest price was Japan ($X per ton), while the average price for exports to the Netherlands ($X per ton) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was recorded for supplies to Australia (X%), while the prices for the other major destinations experienced more modest paces of growth.
Imports of Tubes, Pipes And Hollow Profiles (Of Iron Or Steel)
Imports into Indonesia
In 2023, imports of tubes, pipes and hollow profiles (of iron or steel) into Indonesia declined markedly to X tons, which is down by X% compared with 2022. Over the period under review, imports showed a abrupt downturn. The growth pace was the most rapid in 2022 when imports increased by X% against the previous year. Imports peaked at X tons in 2012; however, from 2013 to 2023, imports remained at a lower figure.
In value terms, imports of tubes, pipes and hollow profiles (of iron or steel) dropped rapidly to $X in 2023. In general, imports recorded a perceptible descent. The most prominent rate of growth was recorded in 2022 with an increase of X% against the previous year. Imports peaked at $X in 2012; however, from 2013 to 2023, imports failed to regain momentum.
Imports by Country
In 2023, China (X tons) constituted the largest supplier of iron or steel pipe and tube to Indonesia, with a X% share of total imports. Moreover, imports of tubes, pipes and hollow profiles (of iron or steel) from China exceeded the figures recorded by the second-largest supplier, Germany (X tons), twofold. Japan (X tons) ranked third in terms of total imports with a X% share.
From 2012 to 2023, the average annual rate of growth in terms of volume from China totaled X%. The remaining supplying countries recorded the following average annual rates of imports growth: Germany (X% per year) and Japan (X% per year).
In value terms, China ($X), Germany ($X) and Japan ($X) constituted the largest iron or steel pipe and tube suppliers to Indonesia, with a combined X% share of total imports.
Among the main suppliers, Germany, with a CAGR of X%, saw the highest rates of growth with regard to the value of imports, over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
The average import price for tubes, pipes and hollow profiles (of iron or steel) stood at $X per ton in 2023, reducing by X% against the previous year. Overall, the import price, however, recorded a relatively flat trend pattern. The growth pace was the most rapid in 2022 an increase of X%. As a result, import price attained the peak level of $X per ton, and then fell in the following year.
Prices varied noticeably by country of origin: amid the top importers, the country with the highest price was Japan ($X per ton), while the price for Vietnam ($X per ton) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by China (X%), while the prices for the other major suppliers experienced mixed trend patterns.
Source: IndexBox Platform
This report provides an in-depth analysis of the market for iron or steel pipe and tube in Indonesia. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 24201110 - Line pipe, of a kind used for oil or gas pipelines, seamless, of stainless steel
- Prodcom 24201150 - Line pipe, of a kind used for oil or gas pipelines, seamless, of steel other than stainless steel
- Prodcom 24201210 - Casing, tubing and drill pipe, of a kind used in the drilling for oil or gas, seamless, of stainless steel
- Prodcom 24201250 - Casing, tubing and drill pipe, of a kind used in the drilling for oil or gas, seamless, of steel other than stainless steel
- Prodcom 24201310 - Tubes and pipes, of circular cross-section, seamless, of stainless steel (excluding line pipe of a kind used for oil or gas pipelines and casing, tubing and drill pipe used for oil or gas drilling)
- Prodcom 24201330 - Precision tubes and pipes, of circular cross-section, colddrawn or cold-rolled, seamless, of steel other than stainless steel
- Prodcom 24201350 - Tubes and pipes, of circular cross-section, cold-drawn or coldrolled, s eamless, of steel other than stainless steel (excluding precision tubes and pipes)
- Prodcom 24201370 - Tubes and pipes, of circular cross-section, hot-finished, s eamless, of steel other than stainless steel (excluding line pipe of a kind used for oil or gas pipelines and casing, tubing and drill-pipe used for oil or gas drilling)
- Prodcom 24201400 - Tubes and pipes, of non-circular cross-section, seamless, a nd hollow profiles, seamless, of steel
- Prodcom 24202110 - Line pipe, of a kind used for oil or gas pipelines, longitudinally welded, of an external diameter > .406,4 mm, of steel
- Prodcom 24202150 - Line pipe, of a kind used for oil or gas pipelines, other than longitudinally welded, of an external diameter > .406,4 mm, of steel
- Prodcom 24202200 - Casing, of a kind used in drilling for oil or gas, welded, of an external diameter > .406,4 mm, of steel
- Prodcom 24202300 - Tubes and pipes, welded, of an external diameter > .406,4 mm, of steel (excluding line pipe of a kind used for oil or gas pipelines and casing used for oil or gas drilling)
- Prodcom 24202400 - Tubes and pipes, riveted or similarly closed, of an external diameter > .406,4 mm, of steel (excluding line pipe for oil and gas pipelines, casing used for oil or gas drilling and welded tubes and pipes)
- Prodcom 24203110 - Line pipe, of a kind used for oil or gas pipelines, longitudinally or spirally welded, of an external diameter . .406,4 mm, of stainless steel
- Prodcom 24203150 - Line pipe, of a kind used for oil or gas pipelines, longitudinally or spirally welded, of an external diameter . .406,4 mm, of steel other than stainless steel
- Prodcom 24203210 - Casing and tubing, of a kind used in drilling for oil or gas, w elded, of an external diameter . .406,4 mm, of stainless steel
- Prodcom 24203250 - Casing and tubing, of a kind used in drilling for oil or gas, w elded, of an external diameter . .406,4 mm, of steel other than stainless steel
- Prodcom 24203310 - Tubes and pipes, of circular cross-section, welded, of an external diameter . .406,4 mm, of stainless steel (excluding line pipe of a kind used for oil or gas pipelines, and casing and tubing used for oil or gas drilling)
- Prodcom 24203340 - Precision tubes and pipes, of circular cross-section, welded, o f an external diameter . .406,4 mm, of steel other than stainless steel
- Prodcom 24203370 - Tubes and pipes, of circular cross-section, hot- or coldformed and welded, of an external diameter . .406,4 mm, of steel other than stainless steel
- Prodcom 24203410 - Tubes and pipes, of non-circular cross-section, hot- or coldformed and welded, of stainless steel
- Prodcom 24203430 - Tubes and pipes, of square or rectangular cross-section, of a wall thickness . 2 mm, hotor cold-formed and welded, of steel other than stainless steel
- Prodcom 24203450 - Tubes and pipes, of square or rectangular cross-section, of a wall thickness > 2 mm, hot-or cold-formed and welded, of steel other than stainless steel
- Prodcom 24203470 - Tubes and pipes, of other non-circular cross-section than square or rectangular, hot- or cold-formed and welded, of steel other than stainless steel
- Prodcom 24203500 - Tubes and pipes, open seam, riveted or similarly closed, of steel (excluding line pipe for oil and gas pipelines, casing and tubing used for oil or gas drilling and other welded tubes and pipes)
- Prodcom 24512000 - Tubes, pipes and hollow profiles of cast iron excluding tubes, p ipes, hollow profiles made into identifiable parts of articles, s uch as sections of central heating radiators and machinery parts
Country coverage:
- Indonesia
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in Indonesia
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption In 2012-2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
- Trade Balance, In Physical Terms, 2012-2023
- Trade Balance, In Value Terms, 2012-2023
- Per Capita Consumption, 2012-2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for iron or steel pipe and tube in Asia.
This report provides an in-depth analysis of the market for iron or steel pipe and tube in the U.S..
This report provides an in-depth analysis of the market for iron or steel pipe and tube in China.
This report provides an in-depth analysis of the market for iron or steel pipe and tube in the EU.
This report provides an in-depth analysis of the global market for iron or steel pipe and tube.